Description
Catch basins assembling:
1. Establish the collection point and/or inspection point along the channel of the pipeline to be installed.Considering that the collecting well in not self carryng, no less than 10-15 cm of concrete is to be used around the collecting well.
2. Lay a cement bed to prepare the bas of the collecting well.
3. Cut out corresponding to the diameter of the tube to be inserted,placing on object (preferably a piece of wood) on the opposite side in order to avoid accidental breakage or damage to the diaphragm.
4. Place the collecting well and apply the grill or the lid with the correct inclination and the fixed pipes place everything in the channel inserting the pipes in the rings and seal with silicon.
5. Fill the channel with cement made of fine sand so that all spaces are adequately filled in because the collecting well is not self carrying but becomes so with the adequate positioning of the cement.
6. Finish the fittings keeping the paving some millimeters higher than the cover of the collecting well.In the case of asphalted area, put some cold asphalt near the collection well's edge in order to prevent the boiling bitumen to alter the aesthetic quality of the product.
Romana